Trapezoid Cushion

$0.00

-

Trapazoid-Seat-Template.jpg

Measuring Your Trapezoid Cushion
Trapezoid cushion thickness starts at 2" and goes up to 6" Solid Fiber filling does not allow for 1/2" increments.
Trapezoid cushion widths start at 10" and go up to 123" in width in 1/8" increments. Each measurement must be included. A" and C" measurements should always be larger than the E" measurement. D" measurement should always be larger than the B" measurement.
Trapezoid cushion depths start at 10" and go up to 30". The depth of your bench should be measured from the back of the bench to the front of the bench assuming you are standing in front of your bench facing it.

Cushion Add-Ons


Description

How to wash your cushions:

Cleaning instructions for the indoor only fabrics: Remove the cover from the insert/filling if possible, close the zipper. Clean the cover using a sponge and mild detergent then air dry.
Cleaning instructions for outdoor Grade A/A2 fabrics: Remove the cover from the insert/filling if possible, then close the zipper. Clean the cover by wiping down the fabric or hand washing with warm water and a mild soap solution then air dry.
Cleaning instructions for Sunbrella Grade B+ fabrics: Remove the cover from the insert/filling if possible, then close the zipper. Machine wash in cold water on the delicate cycle with normal amounts of mild laundry detergent. For severe mildew or stains, add 1 cup of bleach. Allow cover to air dry.
Additional Fabric Cleaning Resources:
Sunbrella Cleaning Guide
Sunbrella Upholstery Care Cleaning

Reviews

There are no reviews yet.

Be the first to review “Trapezoid Cushion”

Your email address will not be published. Required fields are marked *